FUJIWELD-12 ABS APPROVED | E-6012
It is especially suitable for overhead and horizontal welding.
Description: This is provided not only with a high workability, but also is accompanied with small spatterings and slag easily removes, which the beads have a highly beautiful apperance. Thus, it is especially suitable for overhead and horizontal welding. This ranks among the best electrode of high titanium oxide type.
​
Application: Outside plate of vehicles, blowers, cultivating machines, light vehicles, general machines, pipes, light gauge constructions.
​
CURRENT AC or DC.
FUJICHAMFER NGD
Gouged surface is very beautiful and no machining is necessary. It is used for welding and filling in blow holes.
Description: Gouged surface is very beautiful and no machining is necessary. It is used for welding and filling in blow holes. As "NGD" which is different from other gouging rod contains no graphite, there is nothing to worry about the graphite residues on the gouged surface. For mild steel or ordinary cast iron it is possible to make the welds of deep penetration type and to fill the blow holes by adjusting the current range with the same electrode. And there is no lowering of gouging capacity by the overheating of electrodes from the good heat resistibility of covering. It can be used for efficient cutting by manipulation of electrodes.
Application: Preparing joints to be welded, back chipping, removal of defects and unwanted sections, cutting of risers and gates from castings. It is especially suited for the cast iron, stainless steel and nonferrous metals which are difficult to cut.
​
CURRENT AC or DC.
FUJIWELD NS-308
Type of welding electrode designed for welding stainless steel materials.
Description: This is lime-titania type electrode, which shows 19% Cr-9% Ni Austenitic weld metal perfectly free from spatters. Its usability is superb. Its properties are excellent in resistibility for heat and corrosion. It is widely used for various chemical and food processing processes and buildings within austenitic stainless steel. No spatter adheres to weldments, and no staining arises. Peeling-off of the slag is very good.
​
Application: Welding of AISI304 stainless steel. Besides, welding of AISI301, AISI302 stainless steel.
CURRENT AC or DC+
FUJIWELD NS 316L
Specific type of welding electrode designed for welding stainless steel, specifically the austenitic stainless steel grade known as 316L.
Description: NS 316L is a lime-titania type stainless steel electrode which gives an extra low carbon 19%Cr-12%Ni-2%Mo austenitic stainless deposited metal. As the carbon content is lower than of 316 type, the deposited metal prevents itself from intercrystalline corrosion caused by separation of chromium carbide and also has an excellent creep strength.
​
Application: Mainly used for welding of AISI316 L stainless steel.
​
CURRENT AC or DC+
Our Works
